Product Reviewed 95 times. Only most recent 100 shown
|
Rating Stars
|
Reviewer
|
Date
|
|
Richard H From Stafford, TX |
11/30/23 |
|
I used the grommets to seal openings I created as a passthrough for stereo cables through a sheetrock wall
|
|
James P From West Bloomfield, MI |
09/20/23 |
|
|
Bruce B From Draper, UT |
04/28/23 |
|
|
William M From Bassfield, MS |
01/24/23 |
|
I built an entertainment center and used these for the wire holes.
|
|
|
Jennie B From Leawood, KS |
04/20/22 |
|
These work great to provide a finished look to my custom wall mounted cabinets. Visible wires are a pet peeve. These have allowed me to finish holes drilled in cabinets to hide wires, beautifully. 1.5†proved to be a difficult size to find. Thrilled I found these!
|
|
|
Evelyn J From Dauphin, PA |
11/17/21 |
|
I Plan on using the lid to cover a hole in the back porch where we brought a cable into it to plug in thereby lighting the lights in the back yard. I cannot use the whole thing because the cable is already in place and I want to cover the hole that we rought the plug in thru so it won't rain in. With a bit of putty, I believe I can do this. The others I bought are so that I have something line this on hand for the next time we bring a cable thru a wall, so that I can use the unit as it is intended, instead of just plastering the cap on.
|
|
|
Richard K From Floyds Knobs, IN |
09/12/21 |
|
Best price I could find for this part.
|
|
|
David N From SCOTTSDALE, AZ |
06/02/21 |
|
Product came and works great. I was a little hesitant to order based on the website and so many scams out there, but it's legit.
|
|
|
Mark D From BRADFORDWOODS, PA |
04/08/21 |
|
This was perfect for a hole I made in the drywall to pass an ethernet cable. Fits snugly based on the dimensions described.
|
|
|
Mitch R From Wabash, IN |
03/04/21 |
|
Bring cables thru my wall
|
|
|
Robert B From Modesto, CA |
01/23/21 |
|
|
Dan B From Toronto, ON |
01/20/21 |
|
|
Richard F From ROSWELL, GA |
12/04/20 |
|
|
Robert V From New York, NY |
11/20/20 |
|
For access to electric outlet in a bookcase.
|
|
|
Colleen B From Ft Wright, KY |
11/12/20 |
|
Using for my tv cable and game console cords on either side of our fireplace built-ins.
|
|
|
Peter C From Shrewsbury, MA |
10/04/20 |
|
I used this product to plug a 1.5 inch hole in a vinyl lamp post column where wiring exited. Worked well, looked very good.
|
|
|
Kathy Y From Waukesha, WI |
09/08/20 |
|
|
Edward L From Yarmouth Port, MA |
08/28/20 |
|
Product made the wire pull through look professional
|
|
|
Craig P From Hazlet, NJ |
08/02/20 |
|
I have a ping pong table suspended from cables on my den ceiling. The grommets finish off the holes in the ceiling to make them look nice.
|
|
|
Dan B From Belmont, CA |
07/24/20 |
|
Just to fill a drilled hole in a more elegant fashion
|
|
|
Juda O From Carle Place, NY |
07/01/20 |
|
|
Kerri H From Osburn, ID |
06/13/20 |
|
|
Mark B From Spring Hill, FL |
05/06/20 |
|
Used to fill hole in shelf over a cabinet mounted microwave/hood. The hole was drilled large for the power cord.
|
|
|
J David P From Bethel Park, PA |
04/24/20 |
|
Nice product. Used it to add rear wiring through a bookcase I refinished.
|
|
|
Paul W From Chardon, OH |
04/01/20 |
|
I uses it for my electric tooth brush. I drilled a hole in my medicine cabinet and put the plug out to the nearby receptacle. Worked great!
|
|
|
Dan B From Belmont, CA |
02/14/20 |
|
To cover a wiring project
|
|
|
Zachary K From BROOKLYN, NY |
01/15/20 |
|
Exactly what I needed. Finishing a basement surround system and needed a clean way for in-wall speaker wires to connect to hanging speakers. Didn't want to fiddle with full-sized plates and terminals—I just wanted to connect the wires to the speakers directly. I used a hole saw to cut through drywall, used fish tape to get the wire from its location behind the wall to the hole. Installed the grommet base with construction adhesive (it fit perfectly), passed the wire through, installed the lid. The opening in the lid is a little larger than the wire, so I will probably put a dab of caulk there. The point is that the footprint of the entire connection is tiny and is completely hidden by the speaker itself, which is what I wanted.
|
|
|
john s From aurora, CO |
12/11/19 |
|
|
Mike B From Denver, PA |
11/13/19 |
|
|
Kelly C From Conroe, TX |
11/01/19 |
|
|
John T From Rocky Mount, NC |
09/26/19 |
|
Great service and product
|
|
|
John B From Carlsbad, CA |
08/07/19 |
|
|
RICHARD G From FORT MYERS, FL |
05/08/19 |
|
|
JIM S From ROCHESTER, NY |
04/04/19 |
|
|
David A P From Doylestown, PA |
03/14/19 |
|
Covering holes in wall where wall-mounted tv cable is passing through which prevented a visible cable hanging below the set.
|
|
|
Kathy M From Brier, WA |
03/08/19 |
|
|
Art S From Kent, WA |
03/06/19 |
|
Grommets used for new TV installation. Great quality and super-good price!
|
|
|
Richard A From Henderson, NC |
02/06/19 |
|
Actually used to dress up a hole I needed in the side of a motorhome. it worked better then I expected and the cover fits good and tight. I'll be getting more for sure. Thanks.
|
|
|
Richard F From ROSWELL, GA |
01/25/19 |
|
|
Deana K From Acworth, GA |
01/18/19 |
|
Had white bar countertops installed with a hole in the granite to fit a margarita blender cord down through when needing electric. Could not find white and in 1/1/2 size at my local home improvement store. So glad to find it here to use to hide the rough drill hole on the countertop. Was very happy with price and product.
|
|
|
Steve L From Vincent, OH |
01/11/19 |
|
Built sewing table for wife and these helped channel the cables
|
|
|
Jeffrey S From West Palm Beach, FL |
12/22/18 |
|
|
Glen H From Staten Island, NY |
12/12/18 |
|
Used it to run cable TV wire thing and I love behind the television
|
|
|
Ben C From MILTON, GA |
11/26/18 |
|
|
Larry D From Porter, TX |
10/24/18 |
|
|
Buckley L From Lexington, SC |
09/20/18 |
|
|
Robert S From Mifflinburg, PA |
07/01/18 |
|
They were exactly what I was looking for and they arrive just before I delivered the piece that I built. Thank you.
|
|
|
Laura R From Lubbock, TX |
06/21/18 |
|
worked perfectly for my new book shelves
|
|
|
Nyan T From Palo Alto, CA |
05/18/18 |
|
|
Jean L From Houston, TX |
05/04/18 |
|
|
John T From Englewood, FL |
03/22/18 |
|
|
Jack S From Concord, NC |
03/21/18 |
|
|
JACK H From PRINCETON JUNCTION, NJ |
03/19/18 |
|
Very nice product, it finished off my wife's craft table. Made it look very professional.
|
|
|
Faela M From Columbia, SC |
02/16/18 |
|
Local stores didn't have this size. So pleased to find these in white. I installed them in the top of my build in corner cabinet tables so the lamps cords are out of sight.
|
|
|
Michael D From Berwick, ME |
02/15/18 |
|
|
Stuart K From Williamsburg, MA |
02/07/18 |
|
Bathroom vanity for electric toothbrush cord.
|
|
|
Samuel J From Athens, AL |
12/20/17 |
|
|
ludmila l From las vegas, NV |
11/17/17 |
|
|
Sylvia M From Colorado Springs, CO |
11/13/17 |
|
|
Robert K From Oshkosh, WI |
11/01/17 |
|
Exactly what I wanted.
|
|
|
Debra A From Sahuarita, AZ |
10/08/17 |
|
Just exactly what I wanted. I am using them on white painted wood and they blend so well you can't hardly see them. The size was exact with the 1.5" hole saw I used to make the holes. Fits perfect. I knew the depth would not be exact to go thru 5/8" plywood. They are short about 1/16" That is why I bought 20 so I could slice the tops off and apply then to the other side as it will show too on the vertical holes. I was disappointed they don't carry the letter slot grommets.
|
|
|
Bert K From Myrtle Beach, SC |
07/12/17 |
|
do the job
|
|
|
Robert B From GEORGETOWN, TX |
07/10/17 |
|
|
George D From Sheboygan, WI |
07/09/17 |
|
|
John M From Fulshear, TX |
05/25/17 |
|
|
Len P From Bennington, NE |
04/27/17 |
|
Fit exactly as described and good quality for the price.
|
|
|
Jack Z From West Simsbury, CT |
03/11/17 |
|
Worked perfect, thanks.
|
|
|
ann p From Lynchburg, VA |
03/08/17 |
|
|
Lora W From Greenwood Village, CO |
03/08/17 |
|
Matched photo and description perfectly.
|
|
|
william k From nashville, TN |
02/16/17 |
|
|
Todd R From Staunton, VA |
02/15/17 |
|
just what i wanted
|
|
|
Ronald R From Wilmington, DE |
02/09/17 |
|
|
Anfilofie T From Mississauga, ON |
02/09/17 |
|
|
kathleen b From Eastlake, OH |
12/14/16 |
|
|
Eric S From Castle Rock, CO |
12/12/16 |
|
|
Galen K From Mountain Lake, MN |
12/10/16 |
|
|
Dan B From Belmont, CA |
11/18/16 |
|
|
David J From Fort Pierce, FL |
09/12/16 |
|
|
Michael M From Bloomington, IL |
09/08/16 |
|
|
Diane J From Rochester, IL |
07/11/16 |
|
|
Christine U From Waldport, OR |
06/01/16 |
|
It was just what we needed for our TV cable.
|
|
|
Doreen S From Fort Myers, FL |
06/01/16 |
|
|
Kenneth H From Louisville, KY |
12/03/15 |
|
|
Cynthia T From Bradley, WV |
12/02/15 |
|
|
John C From Bainbridge Island, WA |
10/09/15 |
|
|
Stuart D From Boynton Beach, FL |
09/09/15 |
|
|
Lorie H From Eagle, CO |
09/02/15 |
|
|
Kathy S From Fort Wayne, IN |
08/05/15 |
|
|
Brian H From Leesburg, FL |
07/15/15 |
|
|
Casey P From skokie, IL |
06/12/15 |
|
|
Zachary K From Bethesda, MD |
05/07/15 |
|
|
Dom G From Westport, CT |
02/28/15 |
|
Sherry B From Western Springs, IL |
02/20/15 |
|
I realized once I received this grommet that the computer plug I wanted to fit thru the hole was too big. Therefore, since the grommet does not have the capability to slide the opening more, only thin wires can fit thru. Useless for my purposes now.
|
|
|
RESPONSE: Remove the LID of the grommet, slide it against the wire, and then place the grommet BACK in the ring. The plug does not need to travel through the opening hole
|
|
|
|
Lynn F From Powell, OH |
02/05/15 |
|
|
RICHARD G From FORT MYERS, FL |
12/19/14 |
