The LDA18-222 is an articulating wall mount for 13"-42" flat-panel TVs up to 15kg/33lbs especially designed for RVs, TRAILERS, ICE HOUSES, or other mobile units. With enhanced fixing structure, it can be widely applied in RVs, Motor Homes, Caravans, or Ice Houses where the TV needs to be protected from the damage while travelling. Full motion allows maximum flexibility — tilts, swivel and extend your TV up to 390mm from the wall in every direction for easy viewing and also can be fold when not in use for saving space. In-arm cable clip routes cables for a clean appearance. Slide-in wall plate ensures easy installation. VESA-compatible fits 75 x 75, 100 x 100, 200 x 100 and 200 x 200 hole patterns. TWO REAR DOCKING PLATES are included so TV easily slides in and out of the docking stations and can be transferred effortlessly from one station to the other! Each ARM joint is fully lockable ensuring your TV will stay in its place during travel.
Suitable for mounting monitors, and smaller LED, LCD, and plasma sets from 13-42in diag up to 33 lbs.
Please Note: Retail box or supplied documentation may indicate this mount is suitable for a different sized TV. CEDIA (Consumer Electronics Design and Installation Association) has provided us with a REVISED recommended TV size range based on a TV mount's VESA and/or bolt width/height measurements. This revision has generally INCREASED the size capacities of smaller TV mounts as many larger TVs are now much lighter than previous models. We are now using these RECOMMENDED TV Size measurements when stating the approximate TV size ranges that this mount may be suitable. Please DOUBLE CHECK your TVs VESA SIZE and/or mount hole widths and heights and compare these measurements to our clearly published hole width and height size ranges shown above
- Will fit most small to mid-size flat panel LCD monitors with mounting VESA Standard patterns:
- 3"x 3" (VESA 75x75)
- 4"x 4"(VESA 100x100)
- 8" x 4"(VESA 200x100)
- 8" x 8"(VESA 200x200)
- Maximum weight capacity: 33lbs
- Wall Mount Plate: 6.2"H x 2.6"W
Range of Motion:
- Tilt: Up or Down approx: 55 degrees UP, 35 degrees DOWN (Lockable in any position)
- Swivel (left right)l: 180 degrees (Lockable in any position)
- Maximum Arm Reach (when fully extended): 15.43"
Design & Construction:
- Cast Aluminum (with some steel components)
- Dual segment, double long extension arm
- Black and Silver Finish
- Lockable at each joint
- 2 rear docking plates included for quick location swaps
- Bubble Level
- Easy installation
Included in Box:
- Mounting hardware
- Additional rear docking plate
- Mount bolts included: (4) M4x10, (4) M5x10
- User manual
Mounting your TV onto Brick, Masonry, or Concrete? Check out our Anchor Bolts
Mounting your TV directly onto Drywall? Check out our Drywall Mount Kits
NOTICE: All returned TV mounts are subject to a 10% re-stocking fee. All TV mounts, however, have a 1 year replacement warranty (not subject to ANY restocking fee).